Tsurumi provides compact dewatering mannequin

Tsurumi’s small dewatering pump, the LB collection, is designed for applications where house is tight, notably building. Secured by pressure gauge 10 bar or chain, an LB can be used in applications which involve narrow pipes, small tanks, deep pits and in remote places which may be difficult to achieve with larger equipment. The LB mannequin has a totally symmetrical design with no protruding parts, allowing it to be lowered to unknown depths without any danger of snagging. With a diameter of only 187 mm, the pump’s round cross-section even fits into smaller filter pipes. There can also be a version with a water stage sensor which is just some millimetres longer. The pump then controls itself automatically, switching on or off depending on the water level. The LB presses water with filth particles as much as 6 mm in measurement via the housing, allowing optimal cooling of the motor. The models in the series pump 225–440 l/minute and to a maximum of 17.5 m. The smallest model weighs round 10 kg dry, the largest round 30 kg.

Scroll to Top